Model Number

CX-GP-SUB1000

If you want make 3D portrait crystal sample ,you need use 3D camera take a 3D photo first ,second,adjust the 3D photo by our software,finally cost 3-5 min make sample,so in total cost time about 10-20 minutes.If you use our software proficiency,maybe you will quickly than this time.

Advantage :
(1)Small size,like a desk,you can install and move it convenient.
(2)High speed:50000-60000dots/min, take take 3min on engraving size 50x50x80mm crystal need, it will take take 40 sec on engraving size 10x20x30mm crystal.
(3) Capability stably better. Needn’t change any waste parts and needn’t maintenance.
(4) No choice crystal.some similar machine looks like our machine ,but that machine will choice crystal, just can engraving in high quality crystal. our CX-GP-SUB1000 can engraving in high quality crystal, middle quality crystal and color crystal.

Technical Parameter:
Laser Medium: Diode-pumped
Laser Wavelength: 532nm
Max single pulse energy:0.7mj
Laser Power:1.5W @ 1KHZ
Pulse Wide:2ns
Laser Beam Quality:M2<5
Laser Frequency: 1000HZ
Engraving Speed (dots/min.): 50000-60000dots/min
Engraving Laser Head(s): 1 scan mirror
Engraving Area (mm): 70mm x 70mm x 80mm
Foci:100mm
Focus Diameter:0.04mm
Dot Diameter: 0.1mm
Resolution: 800dpi
Motion Control Method: Servo control
Repeated location accuracy: 0.005mm
Continuous Working Time: 24hours
Cooling:  Air-cooling
Power Consumption: 1KW
Electrical Source :AC220V±10% 50-60HZ or AC110V,60HZ
Sound Level: <45db
Applications Materials:All Transparent Materials
Warranty of Quality:  2 months
Computer: Included
Software:  Include GH Special English software
Acceptable File Format: JPG.CRD.GIF.BMP.DXL.PLT and etcs
Circumstance Temperature: 5-35 ℃
Relative Humidity: ≤75%( non-cohere)